Ghost RC V2 1408 4-Pole No Prep Drag Sensored Brushless Motor (7000kV) (Adjustable Endbell)

Skip to product information
1 of 4
Ghost RC Related Products
Out of stock
Price:
Regular price $129.99
Regular price Sale price $129.99
Sale Sold out

 

Motor Overview:

The Ghost RC V2 1408 4-Pole No Prep Drag Sensored Brushless Motor (7000kV) (Adjustable Endbell) represents the pinnacle of engineering excellence in the world of 1/10 No Prep Drag racing. Specially designed for this high-octane racing category, this motor combines raw power with precision engineering to deliver an unparalleled racing experience. Its powerful 4-pole design ensures maximum torque and efficiency, providing an explosive launch off the line. This motor's core strength lies in its high-quality construction featuring a stainless-steel rotor sleeve and high-performance bearings, which together enable higher gearing and support a jaw-dropping 90,000 RPM limit. These features ensure that the motor not only reaches incredible speeds but also maintains consistent performance under extreme conditions, making it a formidable choice for serious racers aiming for the podium.

Moreover, the V2 Ghost RC 1408 motor is equipped with an adjustable end-bell, allowing you to maximize the potential of your 7000kv motor by fine tuning the motor timing. Racing-grade neodymium magnets and an ultra-durable stainless steel shaft ensure that it can withstand the rigors of competitive racing while delivering peak performance. The 8AWG silicone wires enhance electrical conductivity, ensuring that every bit of power from your battery is efficiently transferred to the motor. This meticulous attention to detail and quality allows the motor to deliver all the power needed to rocket out of the sticky prep at the start and maintain a commanding lead across the finish line. Built-in collaboration with Castle Creations, the 1408-7000kV motor leverages thousands of hours of development experience from the groundbreaking 1412-6400kV motor, pushing the boundaries of what is possible in 2S no prep drag racing. This makes the Ghost RC 1408 not just a motor, but a game-changer, ready to redefine your racing experience and dominate the competition.


NOTE:

  • Always run your motor within the manufacturer’s specs
  • Not intended for operation while submerged in liquid
  • Sensor wire must be used to utilize the motor capabilities

Features:

  • Specially designed for 1/10 No Prep Drag racing
  • Powerful 4-pole design
  • Adjustable end-bell allows for fine-tuning the motor timing
  • Optimized for speed with a stainless-steel rotor sleeve and high-performance bearings
  • Enable higher gearing and a head-spinning 90,000 RPM limit
  • Water and element proof design
  • racing-grade neodymium magnets, stainless steel shaft and 8AWG silicone wires
  • Delivers all the power you need to launch out of the sticky prep at the start

Specifications:

  • Application: 1/10 No Prep Drag
  • Type: Brushless Sensored
  • Input Voltage: 2S (7.4V) LiPo
  • Connectors: 6.5mm Male Motor Connectors
  • Diameter: 1.417in (36mm)
  • Length: 2.462in (62.55mm)
  • Mounting Holes: 3mm @25.4mm
  • Shaft Diameter: 0.196in (5mm)
  • Shaft Length: 0.787in (20mm)
  • Weight: 295g (10.4oz)

Includes:

  • (1) V2 1408 4-Pole No Prep Drag Sensored Brushless Motor w/Adjustable Endbell (7000kV)

 

Motor Overview:

The Ghost RC V2 1408 4-Pole No Prep Drag Sensored Brushless Motor (7000kV) (Adjustable Endbell) represents the pinnacle of engineering excellence in the world of 1/10 No Prep Drag racing. Specially designed for this high-octane racing category, this motor combines raw power with precision engineering to deliver an unparalleled racing experience. Its powerful 4-pole design ensures maximum torque and efficiency, providing an explosive launch off the line. This motor's core strength lies in its high-quality construction featuring a stainless-steel rotor sleeve and high-performance bearings, which together enable higher gearing and support a jaw-dropping 90,000 RPM limit. These features ensure that the motor not only reaches incredible speeds but also maintains consistent performance under extreme conditions, making it a formidable choice for serious racers aiming for the podium.

Moreover, the V2 Ghost RC 1408 motor is equipped with an adjustable end-bell, allowing you to maximize the potential of your 7000kv motor by fine tuning the motor timing. Racing-grade neodymium magnets and an ultra-durable stainless steel shaft ensure that it can withstand the rigors of competitive racing while delivering peak performance. The 8AWG silicone wires enhance electrical conductivity, ensuring that every bit of power from your battery is efficiently transferred to the motor. This meticulous attention to detail and quality allows the motor to deliver all the power needed to rocket out of the sticky prep at the start and maintain a commanding lead across the finish line. Built-in collaboration with Castle Creations, the 1408-7000kV motor leverages thousands of hours of development experience from the groundbreaking 1412-6400kV motor, pushing the boundaries of what is possible in 2S no prep drag racing. This makes the Ghost RC 1408 not just a motor, but a game-changer, ready to redefine your racing experience and dominate the competition.


NOTE:

  • Always run your motor within the manufacturer’s specs
  • Not intended for operation while submerged in liquid
  • Sensor wire must be used to utilize the motor capabilities

Features:

  • Specially designed for 1/10 No Prep Drag racing
  • Powerful 4-pole design
  • Adjustable end-bell allows for fine-tuning the motor timing
  • Optimized for speed with a stainless-steel rotor sleeve and high-performance bearings
  • Enable higher gearing and a head-spinning 90,000 RPM limit
  • Water and element proof design
  • racing-grade neodymium magnets, stainless steel shaft and 8AWG silicone wires
  • Delivers all the power you need to launch out of the sticky prep at the start

Specifications:

  • Application: 1/10 No Prep Drag
  • Type: Brushless Sensored
  • Input Voltage: 2S (7.4V) LiPo
  • Connectors: 6.5mm Male Motor Connectors
  • Diameter: 1.417in (36mm)
  • Length: 2.462in (62.55mm)
  • Mounting Holes: 3mm @25.4mm
  • Shaft Diameter: 0.196in (5mm)
  • Shaft Length: 0.787in (20mm)
  • Weight: 295g (10.4oz)

Includes:

  • (1) V2 1408 4-Pole No Prep Drag Sensored Brushless Motor w/Adjustable Endbell (7000kV)